This is a 1710nm 10W high power fiber coupled laser. There are 3 working modes to choose from: CW/TTL/Analog on the back of the power supply. The two white interfaces are the fan power interfaces and also need to be plugged in.
1710nm is an infrared laser, we cannot see 1710nm lasers with our naked eyes, but we can observe them with an infrared detection card. Through the sponge test, we can see that its power is very high and smoke will come out when touched.
The maximum output power of the laser head output end can reach 10W. The power output at the fiber end will be reduced. The general coupling efficiency is 80 to 90 percent.
